|
|
Novagard RTV 400 Series Non Flowable Paste Silicone
This is a non-corrosive, single-component oxime silicone sealant and/or adhesive. A non-flowable, paste product presenting an excellent balance between rate of cure, adhesion and physical properties. Lower odor than conventional acetoxy cured silicones. Functioning as an adhesive sealant, which develops bond to most common substrates without the use of a primer. This ready-to-use, single-component compound is typically used as an adhesive to bond dissimilar materials, as a sealant for creating formed-in-place gaskets, or a multitude of other applications.
more neutral cure silicone sealants
Applications:
| Substitute for Mechanical Fasterners |
Formed-in-place Gaskets |
| Sealing Refrigerator & Freezer Liners |
Adhering Plastic Moldings |
| Waterproofing Electrical Components |
Sealing Coaxial Connectors |
| Protecting Instrumentation Assemblies |
|
Colors: 400-100 White 400-102 Black 400-103 Aluminum 400-150 Translucent 400-303 Gray
These products offer excellent adhesion to numerous substrates including metals and plastics. They also offer outstanding resistance to gasoline, brake fluid, antifreeze and most wheel cleaners. Specially formulated to retain its physical properties even during service in extreme environmental conditions, This is a smooth paste that is ideal for applications that require superior bond strength and moisture resistance. Designed primarily for industrial applications this product is well suited to sealing and bonding applications within many arenas.more Automotive Industrial Silicone Sealants
Colors: 400-110 Black 400-118 Gray 400-155 Translucent
Novagard low adhesion sealants are single-component, non-flowable RTV silicones that cure to a solid rubber like normal silicone RTV except with low adhesion. Ideal for creating formed-in-place gaskets where re-entry or post production disassembly is necessary.
more low adhesion silicone sealant
Colors: 400-900 White 400-950 Translucent
Novagard fast cure sealants are single-component silicone sealants and/or adhesives. These are non-flowable paste products that provide fast tack free times and high green strength. These fast cure products out perform slower materials in multi-step assembly applications. The fast tack and early strength combine to hold the assembly together as the unit moves from station to station. 4-7 minute skin over times and tensile strengths of 150-200 psi after fully cured. more fast cure silicone adhesive sealant
Applications: Component Assembly Component Staking Formed-in-place gaskets
Colors: 400-195 Translucent 400-196 Translucent 400-202 Black
|
|
|
